1963-66 Corvette Retrofit Floor Shift Steering Column - Paintable Steel

SKU: 1120770010

Retrofit 1963-66 Corvette Floor Shift Steering Column - Paintable Steel.

Not Available

Pricing: $587.00

Description
Installation Kits
Special Notes
Details
Shipping

Description

This stylish 8-position tilt column is designed to fit your 1963-66 Corvette and does NOT require modification to your original vehicle to install. Simply remove your old column, saving your original under dash mount and floor mount. A rag joint is required for installation and is used to attach the column to the gearbox. The original rag joint may be used as long as it's in good working condition, but it is recommended that you purchase a new one. Using an ididit installation kit, install your new steering column in place of the old. Using an adaptor, add an aftermarket wheel or use your original steering wheel with the help of the ididit 1963-66 Corvette Steering Wheel Adaptor.

Installation Kits

1963 3003004001
Deluxe Kit - Original Harness
Includes 3/4"-36 x 3/4"-36 Rag Joint and Flasher Kit

1964-66 3003004003
Deluxe Kit - Original Harness
Includes 3/4"-36 x 3/4"-36 Rag Joint and Flasher Kit

1963-66 300053434
Deluxe Kit - Aftermarket Harness
Includes 3/4"-36 x 3/4"-36 Rag Joint

Original Harness
For vehicles with an original factory harness, a 4-way flasher kit is included in your installation kit. This 4-way flasher kit will not only add safety to your vehicle, but will also convert your original wiring harness to the 3 7/8" plug found on your ididit column.

Aftermarket Harness
Many aftermarket wiring companies offer replacement harnesses that incorporate a 4-way flasher unit as well as the flat 3 7/8" plug. If you are using one of these harnesses, a 4-way flasher kit is not necessary.

Special Notes

Please note the space differences when using the original steering wheel vs an aftermarket wheel.
Tilt column with original wheel: 1/2" closer to the driver
Tilt column with aftermarket wheel: 1 1/2" closer to the dash