1967 Mustang Tilt Floor Shift Ford Based w/Rack Steering Column - Paintable Steel

SKU: 1120645010

Retrofit 1967 Ford Mustang Tilt Floor Shift Ford Based with Rack Steering Column - Paintable Steel

Not Available

Pricing: $733.00

Description
Installation Kits
Special Notes
Details
Shipping

Description

Are you a Mustang Fan? Then, these Ford Style column are for you! They feature all Ford wiring and a Ford top shaft. The rack version is made 1" shorter in order to lessen the angle of the U-joint when bolted into your rack & pinion system. To install, simply remove your old column, saving your original under dash mount. A new column specific floor mount is included with every column and is designed to fit your application. The 1967 column has a collapsible inner shaft and comes complete with 4-way flashers. Add your stock Mustang wheel and the gripping surface will be in the same location as the original.

Installation Kits

The 1967 Mustang used two types of stock boxes, "Long" and "Short". The Long box had one piece of shafting from the box to the upper shaft of the steering column. The Short box was attached to the column with a rag joint.

1967 Long Box
Part # 3000313449
Includes 3/4"-36 x 3/4"DD Coupler.

1967 Short Box
Part # 3006002100
3/4"-36 x 3/4"DD Coupler, 2 5/16" long DD Shaft and 3/4"DD x 3/4"-36 Rag Joint

Special Notes

Dimmer/wiper and cruise control options can NOT be added to the Ford Style column due to the manufacturers design of the Ford Style wiring harness.

Please Note: When installing your OEM steering wheel to your ididit Ford Style Retrofit Column, the OEM wheel must be for the same year application as the column. Use of a different year WILL result in damage to the turn signal switch.

If using a Borgeson power assisted box on any year Mustang, the column will need to be shorter (will not work for 1969 ididit columns.) Give us a call for additional information.